| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137 |
- [USBTOOL]
- DEV_NUM=16
- ;Is enable log the downlaod message. 0 = Disable, 1 = Enable
- ENABLE_LOG=1
- ;The default scrip file for download step.
- BOOT_SCRIPT=Fice.conf
- ;The default scrip file for update step (Only use in update tool).
- UpdateConf=gpl162002update.conf
- ;A download description string in update dialog (Only use in update tool).
- DownloadDescription=download description
- ;Set Disk Type: 0 = No Disk, 1 = Disk
- DiskType=0
- ;Set USBTable Type: 0 = Mass Production, 1 = Real Table
- TableType=1
- ;Set Authorize Type: 0 = Standard, 1 = Easy
- AuthorizeType=1
- ;Set time-out when execute IO task
- Timeout_Value=20
- ;download data length each time
- DataLength=4KB|8KB|16KB|32KB|64KB|
- CodePackerPath=
- VID=GENPLUS
- PID=USB-MSDC_DISK_A
- ENBLE_SETTINGBTN=1
- [DeviceInitCommand]
- ; A command that write to device when this device plugin.
- ID=
- [162002_MCS]
- MCS0=1F84
- MCS1=4
- MCS2=C5
- MCS3=4
- MCS4=4
- ENABLE=0
- [162004_MCS]
- MCS0=1F89
- MCS1=FF4F
- MCS2=C3
- MCS3=3F
- MCS4=3F
- ENABLE=1
- [ChipType]
- 0=SLC Nand < 128MB(Physical, Small Page)
- 1=SLC Nand = 128MB(Physical, Small Page)
- 2=SLC Nand > 128MB(Physical, 2K Page)
- 3=RAM
- 4=SLC & MLC Data Area
- 5=Nor Flash
- 6=SPI Nor Flash
- 0x80=MLC 2K Page(Physical)
- 0x81=MLC 4K Page(Physical)
- 0x82=SD Card
- 0x83=MLC & SLC APP Area
- 0x84=MLC 2k + 64byte(Physical)
- 0x23=Nand OTP
- 0x24=AutoWriteBootArea
- 0x25=Register
- [ActionDescription]
- ACT_READ=Read
- ACT_WRITE=Write
- ACT_ERASE=Erase
- ACT_JUMP=Jump to Function
- ACT_INITNAND=Initial Nand Flash
- ACT_RESETDEVICE=Reset Device
- ACT_SETNONMOUNT=Set Non Mount
- ACT_SENDCOMMAND=Send Command
- ACT_LOWLEVELFORMAT=Low Level Format
- ACT_CHIPERASE=Chip Erase
- ACT_APPINIT=App Initial
- ;ACT_COMPAREFILE=CompareFile
- ;replan Send command 0xff40, 0xff29
- ACT_SETAPPVARIABLE=Set App Variable
- ACT_NANDFLASH=Write Nand Flush
- ACT_ERASEALLBLK=Erase All Block
- ACT_WRITESERIALNUMBER=Write Serial Number
- ACT_PROBE_FIRMWARE=ProbePath
- ACT_BACKUPSERIALNUMBER=Backup Serial Number
- ACT_DELAYCOMMAND=DelayStep
- ACT_WRITEROMCODE=Write To RomCode
- [NorFlashType]
- ;Format : Device type = Block size
- ;The below is manufactory Macronix
- MX29LV160T=35
- MX29LV160B=35
- MX29LV800T=11
- MX29LV800B=11
- MX29LV320T=71
- MX29LV320B=71
- ;The below is manufactory SST
- SST39VF1601=32
- SST39VF3201=64
- SST39VF6401=128
- [FT68xxUIOpt]
- LOCK_ENABLE=1
- LOCK_BYTE=0
- LOCK_FULL=1
- LOCK_START_SEC=0
- LOCK_END_SEC=2
- ;LVD Setting
- LVD_EN=0
- LVW_EN=0
- LVR_SEL=3
- LVW_SEL=0
- ;clock setting
- FCK_MODE=0
- EC_MODE=0
- XT_GF_CFG=3
- XT_CUR_CFG=0
- SPEED2=1
- MCD_EN=1
- ;watch-dog setting
- WDT_EN=0
- WDT_RST_EN=0
- WDT_BT_EN=0
- PRE_CHIP=0
- [NorFlashManufacturer]
- SST=1
- AMD/MX=2
- Intel=3
- [UserSelfDefineInfo]
- ;icon name
- Icon_Name=usbtool.ico
- ;company name
- Company_Name=G+ Mass Production Tool(Patch1)
- [ReadbackVerify_Status]
- Continue=0
|
