AC-Motor-FU6815/User/Application/intint.c

#include "FU68xx_5.h"
#include <Myproject.h>


void VREFConfigInit(void)
{
    #if (HW_ADC_VREF == VREF3_0)
    {
        SetBit(VREF_VHALF_CR, VRVSEL1);             //00-->4.5V   01-->VDD5
        ClrBit(VREF_VHALF_CR, VRVSEL0);             //10-->3.0V   11-->4.0V
    }
    #elif (HW_ADC_VREF == VREF4_0)
    {
        SetBit(VREF_VHALF_CR, VRVSEL1);             //00-->4.5V   01-->VDD5
        SetBit(VREF_VHALF_CR, VRVSEL0);             //10-->3.0V   11-->4.0V
    }
    #elif (HW_ADC_VREF == VREF4_5)
    {
        ClrBit(VREF_VHALF_CR, VRVSEL1);             //00-->4.5V   01-->VDD5
        ClrBit(VREF_VHALF_CR, VRVSEL0);             //10-->3.0V   11-->4.0V
    }
    #elif (HW_ADC_VREF == VREF5_0)
    {
        ClrBit(VREF_VHALF_CR, VRVSEL1);             //00-->4.5V   01-->VDD5
        SetBit(VREF_VHALF_CR, VRVSEL0);             //10-->3.0V   11-->4.0V
    }
    #endif
    #if (VREF_OUT_EN)
    SetBit(P3_AN, PIN5);
    SetBit(P3_OE, PIN5);
    #endif
    #if (VHALF_OUT_EN)
    SetBit(P3_AN, P32);
    #endif
    SetBit(VREF_VHALF_CR, VREFEN | VHALFEN);
}


void HardwareInit(void)
{
    // 上电等待
    uint16 PowerUpCnt = 0;
    
    for (PowerUpCnt = 0; PowerUpCnt < 10000; PowerUpCnt++) {};
    
    // 参考电压初始化
    VREFConfigInit();
    
    // 外部中断初始化 预驱故障中断保护
	PreDriverFalutInt();
		
    GPIO_Init();
    
    ADC_Init();
    
    AMP_Init();
    
    Driver_Init();
    
    CMP3_Interrupt_Init();
    
    SYST_ARR = 24000;
    
    SetBit(IP2, PSYSTICK0);
    
    SetBit(DRV_SR, SYSTIE);
    
    _nop_(); _nop_();
    
    #if (PFCEnable==1)//PFC初始化
    PFC_init();
    
    #endif
    PI2_Init();
}

/*  ---------------------------------------------------------------------------------
    Function Name : void SoftwareInit(void)
    Description   : 软件初始化，初始化所有定义变量，按键初始化扫描
    Input         : 无
    Output        : 无
    ----------------------------------------------------------------------------------*/
void SoftwareInit(void)
{
    memset(&mcFaultDect, 0, sizeof(FaultVarible));        // FaultVarible变量清零
    /************保护次数*************/
    memset(&mcProtectTime, 0, sizeof(ProtectVarible));    // ProtectVarible保护次数清零
    /***********过流保护**************/
    memset(&mcCurVarible, 0, sizeof(CurrentVarible));     // 电流保护的变量清零
    memset(&Time, 0, sizeof(TIMERTypeDef));
    memset(&PFCFaultDect, 0, sizeof(PFCFaultVarible));
    memset(&ConTrolCmd, 0, sizeof(CONTROLCMDD));
    /*****电机状态机时序变量***********/
    McStaSet.SetMode                   = 0;
    /*************外部控制环************/
    memset(&mcFocCtrl, 0, sizeof(FOCCTRL));             // mcFocCtrl变量清零
    mcFocCtrl.mcDcbus_chazhi = 32760;
    /******ADC采样滤波值*********/
    memset(&AdcSampleValue, 0, sizeof(ADCSample));      // ADCSample变量清零
    /**************************电流偏置校准变量**********************/
    memset(&mcCurOffset, 0, sizeof(CurrentOffset));    // mcCurOffset变量清零
    mcCurOffset.IuOffsetSum            = 16383;
    mcCurOffset.IvOffsetSum            = 16383;
    mcCurOffset.Iw_busOffsetSum        = 16383;
    /*****速度环的响应***/
    memset(&mcSpeedRamp, 0, sizeof(MCRAMP));          // mcSpeedRamp变量清零
    mcSpeedRamp.IncValue    = Motor_Speed_Inc;
    mcSpeedRamp.DecValue    = Motor_Speed_Dec;
    mcState       = mcReady;
    mcFaultSource = 0;
}